Select Page

Engineering, Design and Manufacturing of Pressure Vessels

Pressure Vessels for the Food Industry

Pressure Vessels and Process Tanks for the Industrial Sector

SACOME Pressure Vessels & Process Tanks

In all process systems, both industrial and food, pressure vessels and process tanks are key elements that play an important role in the whole process system.

 

Thanks to the great knowledge of process systems and our extensive experience as manufacturers of equipment, SACOME provides an unique and flexible approach to the engineering and manufacturing of pressure vessels & process tanks, adapting to the requirements of each project.

Pressure Vessels and Process Tanks for Food Applications

 

For our food grade processing plants and customer requests, SACOME designs and manufactures stainless steel tanks and pressure vessels in a wide variety of sizes and shapes. SACOME pressure vessels & process tanks are manufactured in compliance with the highest standards of workmanship.

SACOME manufacturing process is performed with the highest levels of quality, paying special care to the interior finish, the welds and the various elements that compose it.

The volume of SACOME pressure vessels and process tanks is adjusted to the customer’s needs as well as its dimensions. Typically, they are equipped with two level sensors for maximum and minimum control over a pressure sensor to know every time the analogy level inside.

SACOME pressure vessels and process tanks has a level sensor (one for the maximum level and another for the minimum one), as well as a pressure sensor in order to know the exact amount of product inside the tank. We include in our scope of supply the temperature control, done by means a PT100 gauge connected to the PLC and SCADA.

SACOME pressure vessels and process tanks also contain a manhole (with an opening sensor and safety grid) that allows an easy inspection of the inside. By this way, the operator can provide different ingredients to the tank.

SACOME pressure vessels and process tanks cleaning procedure is usually done by means of CIP balls, although other cleaning systems, under request, can be installed in the vessels.

All the inlet and outlet connections are normalized food grade clamps, manufactured in 316L.

In addition, SACOME food grade pressure vessels & process tanks can included the following components:

    • External coil for heating / cooling.
    • Agitators in various configurations depending on the product and process.
    • Exterior insulation composed of finish wool and an outer stainless steel plate welded and polished to allow cleaning the outside with water.
SACOME Food Storage Tanks are hygienic grade tanks, intended for the storage of the food product

Food Grade Storage Tanks

Intended to the storage of the food product, once it has been thermally treated.
More info
 For SACOME Mixing Tanks, we have developed by ourselves the technology for the internal agitation and scraping of the inner wall of the tanks.

Mixing Tanks

Used to do the mixing process of the different ingredients of a product.
More info
SACOME CIP systems are designed to reduce the time needed cleaning, and recover the maximum amount of solution through recover the maximum quantity of solution by recirculation and conductivity control for neutralization in the next cycle.

CIP Tanks

Used to perform the chemical cleaning of a process plant automatically.
More info
One of the main purposes of the balance tanks is to keep constant the liquid column pressure at the inlet of the pump, to avoid the risk of cavitation, as well as a constant flowrate is kept in the production.

Balance Tanks

Key element to guarantee the production in a process system.
More info
The main purpose of SACOME deareation tanks is to remove the air and other dissolved gases (mainly oxygen), in order to avoid oxidation or corrosion problems.

Deareation Tanks

With systems for the recovery of aromas and flavours.
More info
This filling hopper install has a similar design to the feeding tanks; however, it has special connections for the filling systems.

Filling Hopper Install

With special connections for the filling systems.
More info
SACOME has been improving the agitation and scraping technologies, to avoid the sticking of the product to the inner walls of the vessel, that can operate at atmospheric pressure, but also pressurised or under vacuum conditions.

Cooking Tanks

With our own agitation and scraping technologies.
More info
SACOME feeding tanks are hygienic vessels like the storage tanks but with a smaller size, intended for the storage of the food product before being sent to the filling and packing section.

Feeding Tanks

Intended for the storage of the food product before being sent to the filling and packing section.
More info

Pressure Vessels and Process Tanks for Industrial Applications

 

SACOME, as a specialist manufacturer of Pressure Vessels and Process Tanks, offers optimal solutions for several applications for the industrial and chemical industryin response to our customers and markets demand.

SACOME Industrial Storage Tanks are widely used in the petrochemical industries, such as refineries or gas production plants, to store liquids or gases, overall at atmospheric pressure, before its in-line processing.

Industrial Storage Tanks

To store liquids or gases before its in-line processing.
More info
SACOME distillation columns are intending to do the separation of one or several components having different degrees of volatility in a mixture.

Distillation Columns

Used to do the separation of one or several components in a mixture.
More info
For SACOME reactors & mixing tanks we use our own technology for the internal agitation and scraping of the inner wall of the tank, that allows us to guarantee a good contact among the different phases contained in the reactor to get the required degree of mixture.

Reactors & Mixing Tanks

To guarantee a good contact among the different phases contained in the reactor to get the required degree of mixture.
More info
The Tanks with an Internal Grid designed and manufactured by SACOME allows the operator to remove from the product the solid particles with a bigger size, the non-burn contents and even the unwanted solids (i.e. bolts)

Tanks with an Internal Grid

Intend to remove from the product the solid particles with a bigger size as well as the non-burn contents.
More info

Engineering, Design and Manufacturing of Pressure Vessels & Process Tanks

Can we help you? Our Technical Department will provide you with the necessary support

Contact Us!

Este sitio web utiliza cookies para que usted tenga la mejor experiencia de usuario. Si continúa navegando está dando su consentimiento para la aceptación de las mencionadas cookies y la aceptación de nuestra política de cookies, pinche el enlace para mayor información.plugin cookies

ACEPTAR
Aviso de cookies