S-TF40AH-D Tubular Heat Exchanger
Annular Space Tubular Heat Exchanger with removable inner tube and axial product inlet.
Special design for high pressure.
This tubular heat exchanger is part of our new Sanitary Line of heat exchangers.
Tubular Heat Exchanger Description
S-TF40AH-D Tubular Heat Exchanger is a heat exchanger consisting of four concentric tubes. The product flows through the central annular space while the service does it through the outer and inner channels.
Tubular Heat Exchanger Applications
Heating processes (pasteurization, sterilization, UHT, etc.) or cooling of products with high viscosity. This model is designed for products such as chocolates, butters, tomato paste, jams, pudding, custard, yogurt, among others
S-TF40AH-D Tubular Heat Exchanger Technical Data Sheet
Standard Design Conditions
Design Pressure: 10 barg
For higher design pressure or temperatures as well as hazardous fluids, the heat exchangers can be checked according to AD 2000 Merkblätt, ASME VIII Div.1, PD 5500, EN13445 or by Finite Elements Analysis and CE certificated by individual inspection modules.
Included: 3.1 Quality certificate and CE Marking according 2014/68/UE.
Inner Tube: ≥ 16 mm
Lenght: 1-1,5-2-3-6 m
Other available sizes under request.
Stainless Steel 304 or 316L
Other materials available on request (2205, 2507, 254 SMO among others)
Other connections available on request.
Product channel designed to promote CIP (Clean In Place)
Mineral wool coated in 304 stainless steel metal sheet
Stainless Steel 304.
The type and shape of the frame will be selected to fit the needs of each project. If required, equipment may be sloping for better drainage.
In case the equipment contains several units in series, SACOME can provide the interconnections for the product channel and the service channel.
Annular space with axial product inlet with special design for high pressures
Removable inner tubes
Without / With expansion joint
Ø TUBE 3 (mm)
Ø TUBE 2 (mm)
Ø TUBE 1 (mm)
Ø TUBE 0 (mm)
Nominal Length (mm)
Shell Side Material
Tube Side Material
Corrugation Indicator (Hard/Soft/Plain)