S-TFM-I Tubular Heat Exchanger
S-TFM-I Tubular Heat Exchangers Description
The S-TFM-I Tubular Heat Exchanger is a multitube heat exchanger with non removable tube bundle.
The S-TFM-I Tubular Heat Exchanger is part of our new Sanitary Line.
S-TFM-I Tubular Heat Exchanger Operation
The S-TFM-I Tubular Heat Exchanger is a shell and tube heat exchanger with a tube bundle within a shell. The product flows by the inner tubes while the service does it by the external channel.
S-TFM-I Tubular Heat Exchanger Applications
S-TFM-I Tubular Heat Exchanger Technical data Sheet
Standard Design Conditions
Design Temperature: 180°C
Design Pressure: 10 barg
For higher design pressure or temperatures as well as hazardous fluids, the heat exchangers can be checked according to AD 2000 Merkblätt, ASME VIII Div.1, PD 5500, EN13445 or by Finite Elements Analysis and CE certificated by individual inspection modules.
Included: 3.1 Quality certificate and CE Marking according to 2014/68/UE
Shell side: 52 mm – 204 mm
Tube side: ≥ 16 mm
Length: 1-1,5-2-3-6 m
Other available sizes under request.
Shell and tubes:
Stainless Steel 304 or 316L
Other materials available on request (2205, 2507, 254 SMO among others)
Other connections available on request.
Product channel designed to promote CIP (Clean In Place)
Mineral wool coated in 304 stainless steel metal sheet.
Stainless Steel 304
The type and shape of the frame will be selected to fit the needs of each project. If required, equipment may be sloping for better drainage.
In case the equipment contains several units in series, SACOME can provide the interconnections for the product channel and the service channel. Thinking of the easy drainability we propose eccentric reductions.
SACOME TYPE DEFINITION
Non removable tube bundle
Number of inner tubes
Without / with expansion joint
Ø Shell side (mm)
Ø Inner tube (mm)
Nominal length (mm)
Shell side material
Tube side material
Corrugation indicator (Hard/Soft/Plain)
The importance of rheology in the design of any processing plant is crucial since the sizing of many of the elements composing it is very dependent on this “resistance”, also taking special relevance with food products: heat exchangers, pipes, valves, pumps, mixers, etc.
To design a heat exchanger it is necessary to have certain data, such as the process flow rate, the temperature and the physical properties of products.
Hairpin heat exchangers have a more efficient and economical design compared to a multiple pass heat exchanger when the process requires a temperature crossing between the cold and hot fluid.
Engineering, Design and Manufacturing of Tubular Heat Exchangers
Can we help you?
Our Technical Staff shall be delighted to provide you with detailed information