\u00a0<\/p>\n
Bellows<\/h3>\n
The bellows<\/strong> is the flexible element, composed of one or more waves deformed circumferentially under hydraulic and \/ or mechanical shaping procedures<\/strong><\/span><\/a>. This is a matter of key importance, since it allows to get homogeneous thicknesses<\/strong> and stress distributions unlike for those bellows deformed under mechanical conditions or with circumferential welds. In fact, in some sectors, such as the nuclear sector at its level 2, mechanically deformed expansion joints or compensators are not accepted. The total movement of the bellows is proportional to the number of waves that make up the expansion joint bellows. The movement capacity responds to parameters such as the thickness, the number of sheets, the height and wave pitch, among others.<\/p>\n \u00a0<\/p>\n Metal bellows detail<\/p>\n The connections<\/strong> are those parts that link the expansion joint<\/strong> to the plant elements. There is a wide range of connections them, but the most common connections at the ends are welding-neck pipes connections, loose flanges or fixed flanges.<\/p>\n The inner sleeve<\/strong> is the inner tube underneath the bellows, being its duty to protect the bellows<\/strong> from turbulence in the fluid, from direct thermal impacts, from abrasive products, etc. In some cases, the inner sleeve<\/strong> is intended as an axial guidance<\/strong>, thus cancelling out the effects of the internal pressure.<\/p>\n \u00a0<\/p>\n Its role is similar to that of the inner sleeve, but from the outside. The duty of the outer sleeve<\/strong> is preventing particles deposition in the gap between the waves of the bellows, rendering it impossible normal operation of the bellows, welding projections during assembly, etc.<\/p>\n \u00a0<\/p>\n It is important to make the difference between the control rods<\/strong> of the expansion joints<\/strong> and compensators<\/strong>, and the so-called “tie rods”, since the function of the control rods is focused on the guidance and restriction of movements of the expansion joint<\/strong>, and in some cases to contribute to an easier pre-stretching of the metal expansion joints or metal compensators.<\/p>\n \u00a0<\/p>\n The main role of the tie rods on an expansion joint<\/strong> is to continuously restrain the pressure thrust<\/strong> during normal operation. The tie rods are usually used in those expansion joints<\/strong> or compensators<\/strong> that work with lateral movement<\/strong>.<\/p>\n \u00a0<\/p>\n Metal expansion joint with tie rods<\/p>\n \u00a0<\/p>\n Joints are used to allow angular movement in one direction (HINGED<\/span><\/a>) or in many directions (GIMBAL<\/span><\/a>). Its use is limited to those metal expansion joints<\/strong> and compensators<\/strong> that work under conditions of angular and \/ or lateral movement<\/strong>.<\/p>\n \u00a0<\/p>\n There are two types of rings<\/strong> or reinforcement rings<\/strong>; those that are designed with integral form<\/strong> and, therefore, can not be dismantled; and those made in two halves<\/strong> and, therefore, can be dismantled. The reinforcing rings<\/strong> are placed between the different waves of the bellows to withstand the pressure stresses in high pressure expansion joints<\/strong> and metal compensators<\/strong>.<\/span><\/a><\/p>\n [\/et_pb_text][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section bb_built=”1″ fullwidth=”off” specialty=”off” prev_background_color=”#000000″][et_pb_row][et_pb_column type=”4_4″][et_pb_blog _builder_version=”3.17.6″ posts_number=”3″ include_categories=”34″ show_author=”off” show_date=”off” show_pagination=”off” fullwidth=”off” use_overlay=”on” hover_overlay_color=”rgba(0,0,0,0.5)” header_level=”h3″ \/][\/et_pb_column][\/et_pb_row][\/et_pb_section]<\/p>\n","protected":false},"excerpt":{"rendered":" There are many design alternatives, depending on the elements that make up the metal expansion joint or compensator.<\/p>\n","protected":false},"author":2,"featured_media":21962,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[49],"tags":[],"class_list":["post-21630","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-expansion-joints-technical-documentation"],"_links":{"self":[{"href":"https:\/\/www.sacome.com\/en\/wp-json\/wp\/v2\/posts\/21630"}],"collection":[{"href":"https:\/\/www.sacome.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.sacome.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.sacome.com\/en\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.sacome.com\/en\/wp-json\/wp\/v2\/comments?post=21630"}],"version-history":[{"count":52,"href":"https:\/\/www.sacome.com\/en\/wp-json\/wp\/v2\/posts\/21630\/revisions"}],"predecessor-version":[{"id":28551,"href":"https:\/\/www.sacome.com\/en\/wp-json\/wp\/v2\/posts\/21630\/revisions\/28551"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.sacome.com\/en\/wp-json\/wp\/v2\/media\/21962"}],"wp:attachment":[{"href":"https:\/\/www.sacome.com\/en\/wp-json\/wp\/v2\/media?parent=21630"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.sacome.com\/en\/wp-json\/wp\/v2\/categories?post=21630"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.sacome.com\/en\/wp-json\/wp\/v2\/tags?post=21630"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}![\"Fuelle](\"https:\/\/www.sacome.com\/wp-content\/uploads\/2017\/06\/SACOME-JUNTA-DE-EXPANSION-SIMPLE-300x199.jpg\" "\\"Fuelle")
<\/p>\n<\/h3>\n
Connections<\/h3>\n
![\"Compensador](\"https:\/\/www.sacome.com\/wp-content\/uploads\/2017\/06\/Compensador-simple-sin-tirantes-con-bridas-giratorias-SGO-SACOME-300x300.png\")
Metal expansion joint with loose flanges<\/p>\n<\/h3>\n
Inner Sleeve<\/h3>\n
Outer Sleeve<\/h3>\n
Control rods<\/h3>\n
Tie Rods<\/h3>\n
![\"Compensador](\"https:\/\/www.sacome.com\/wp-content\/uploads\/2017\/07\/Junta-de-dilatacion-universal-con-tirantes-UGT_SACOME-300x300.png\" "\\"Compensador")
<\/p>\nJoints<\/h3>\n
Reinforcement rings<\/h3>\n